Model Information
The ARGO Avenger is an 8 wheel drive amphibious off-road vehicle with 4 cycle overhead valve V-Twin liquid cooled 674cc, Kohler Aegis LH 685 engine with electronic ignition, solenoid shift starter, fuel accelerator pump and full pressure lubrication. It uses regular unleaded gasoline, has low emissions and comes with a three-year warranty.
Black
Blue
Red
Tundra
Yellow
Camo
Features
- 25” Rawhide III tires with aggressive tread pattern and lug size
- Power to all wheels for optimum performance in challenging terrain
- One-piece ergonomic handlebar steering control
- Contoured dash design and densely padded foam front bench seat
- State-of-the-art continuous variable transmission with high and low range forward, neutral and reverse
- Excellent approach and departure angles to easily overcome obstacles
- Innovative design and space for up to 6 passengers
Standard Equipment
- Hydraulic vented disk brakes for ease of operation
- Full skid plate for lower body protection
- Front & rear axle bearing extensions for increased axle & bearing life
- Convenience group (12volt outlet, cup holders, grab handle)
- Voltmeter, Hourmeter, Temperature Gauge, Low Oil Pressure Light
Model Specifications
| Engine | 4 cycle OHV V-Twin gasoline engine,electronic ignition, full pressure lubrication and oil filter |
| Model | Kohler Aegis LH 690 |
| Horespower | 26 |
| Displacement | 674cc |
| Cooling | Liquid cooled |
| Starting | Electric |
| Brakes | Hydraulic vented disc brakes |
| Steering | One-piece ergonomic handlebar steering control with mounted brake lever and emergency/parking brake |
| Controls | Right-hand twist grip throttle and dash mounted choke control. Light switch and ignition switch. |
| Clutch & Transmission | Belt-driven, Continuously Variable Transmission (CVT) maximizes engine power to the transmission with high and low range forward, neutral and reverse, compactly housed with an efficient planetary differential. |
| Drive System | Roller chains drive machined sprockets that are spline-fit onto 1.25″ diameter axles. Bearings are greaseable and are protected with double-sealed outer flange assemblies. |
| Frame | Formed steel channel construction, welded for high strength and durability. Polyester powder coated for lasting protection. |
| Body | Vacuum formed High Molecular Weight Polyethelene |
| Full Skid Plate | Standard |
| Load Capacity On Land | 1150 lbs / 521 kg total |
| Load Capacity on Water | 1000 lbs / 454 kg |
| Towing Capacity | 1800 lbs/818 kg |
| Seating Capacity | 6 persons on land, 4 persons on water |
| Fuel Capacity | 7.1 US Gallons (27 litres) See through polyethylene fuel tank. 8 hours of operation based on load and operating conditions. |
| Speed – On Land | 20 mph / 32 km per hour |
| Speed – On Water | 3 mph / 5 km per hour |
| Shipping Weight | 1195 lbs / 542 kg |
| Axle Bearing Extentions | Front and Rear Standard |
| Hourmeter | Standard |
| Voldmeter | Standard |
| Temperature Gauge | Standard |
| Low Charge Rate Light | Standard |
| Low Oil Pressure Light | Standard |
| Tires | Goodyear Rawhide III AT25 x 11.50-9 NHS |
| Ground Pressure | 2.1 psi (14.5 kPa) using tires 0.67 psi (4.6 kPa) using tracks |
| Operating Conditions | All weather, all terrain, -40C to +40C |
